| |
 |
Siding-Masteris
the Best, Most Affordable Solution! |
The Siding-Master™ System is the result of 12 years of Research
and
Development by Vision Building Products, Inc. head-quartered in
Omaha, NE. Siding-MasterTMhas been field-tested and installed over
the last 5 years in over 16 States, from the hot suns of the Bahamas
and Florida to the extreme climate swings of the Midwest to the
dry heat of California as well as the East Coast. Our testing as
well as independent third-party testing has confirmed that Siding
MasterTMcan increase the speed of your siding installation job
by up to 50% or more.
Siding-Master™ Strips
The Patented Siding-MasterTMgalvanized steel strips are spaced
on the wall every 16'' and attached with screws through a self
sealing membrane to to provide a secure fit for the siding panel
and minimize the penetration points that lead to moisture intrusion
into the wall cavity.
Siding-Master™ Strips work with:
 |
Most Fiber Cement panel profiles and shapes |
|
Most Wood siding panels |
|
Most Vinyl siding panels |
7”, 8'', 9'', 10'' and 12'' exposure strips are available
to accommodate most siding styles on the market today. This allows
you to choose the siding you prefer and have the comfort of a worry-free
installation. Made of heavy- duty .22 gauge galvanized steel, your
Siding-MasterTMstrips are warranted to retain their finish for
as long as you reside in your home.
The strips can be installed separately over insulation, housewrap,
stucco, block wall, foundation, etc.
Fast-Start™ Starter Strip/Rain Screen Vent/Foundation Cap
|
The vinyl starter strip installs easily in
place to provide a straight, level start for the vinyl siding. |
|
Vent Holes allow moisture to escape from the foundation
of the house. |
|
The Foundation Cap with concealed bugscreen helps protect
foundation from unwanted pest invasions! |
Fast-Finish™ Trim Adaptor/Rain Screen Vent
|
Reduces the chance of top panel blow-off
while achieving a straight and professional installation. |
|
Allows vinyl siding panels to expand and contract naturally
to prevent buckled siding. |
|
The Fast-FinishTrim Adaptor can be used with both J-channel
and
utility trim for a perfect fit and stylistic match to the vinyl
siding. |
|
The Fast-Finishaccessory gives us the backing to warranty
against
panel blow off in winds up to 130 MPH, or a Category 3 Hurricane! |
|
Slots vent condensation out the top |
Overhang Attachment & Alignment System™
The Overhang Attachment and Alignment System was designed
to
complete the Siding-MasterTM system. The overhang strips secure the
overhang material in the channel. This protects the overhang siding
from panel blow-off. Your overhang system is also backed by Siding-
MasterTM’s Lifetime Blowoff Warranty.
Overhang System Specifications
|
The Siding-MasterTMOverhang System is designed
to install up to 16 feet of overhang simultaneously, assuring
a fast, easy and accurate overhang utilizing unskilled labor. |
|
Allows you to place your investment into materials, not expensive
labor. |
The Siding-MasterOverhang Strip is available in 8”, 10'', and
12'' exposures for use with a variety of overhang panels on the market.
The strips can be placed to cover the smallest to largest of overhang
spaces, providing a straight, secure overhang every time. |
|
|
|
|
